| 1 Start De-dross normally open EVS loading hatch |
 |
|
|
| 2 Place Dross direct from the solder pot into Chamber rather than Pail |
 |
|
|
| 3 Press the Cycle Start Button |
 |
|
|
| 4 The machine sqeezes the dross through the chamber teeth into the ingot tray |
 |
|
|
| 5 At the end of the cycle the chamber door opens automatically |
 |
|
|
6 Dross is emptied automatically into the dross pail
|
 |
|
|
| 7 Take out the tray, place in a safe position and allow to cool |
 |
|
|
| 8 Remove the ingots and place back into solder pot as needed |
 |
|
|
